The Mysterious "Destination" / "Points To" Label

Some blog owners buy domains, for publishing a Blogger blog, and ask about how to address the domain.

What address do I use for "Points to"?

Other owners may ask a similar question, referencing "Destination" or maybe "Target".

There is no real difference, between all 3 labels. "Destination", "Target", and "Points to" all refer to the same DNS address value.

To compound the confusion, 4 different addresses are required, when addressing a Blogger custom domain root.

Defining the DNS servers used by the domain root ("naked domain") requires 4 address records - and the labels used, in the zone editor, will vary from registrar to registrar.

We know of 3 different labels, used by Blogger custom domain instructions.

The referential Blogger document How do I use a custom domain name for my blog? uses 3 labels to identify the 4 name servers, which are provided by Google. Blogger uses the triplet label "Destination, Target, or Points to" as their example.

Note that not all registrars use "Name, Label, or Host" and "Destination, Target, or Points to" - because not all registrar zone editors display addresses in a neat column based display.

Google provides 4 name servers, to give us multiple redundancy.

Google provides four mutually redundant individual servers, each responding to a specific IP address - for custom domain clients to address the domain root, in a round robin sequence.

There are 4 name servers provided by Blogger, to address a custom domain root.



Each domain root name server entry uses 2 important label values ("Name, Label, or Host" - and "Destination, Target, or Points to") - with a zone editor that displays addresses in columns.

Each label may have 1 of 3 values, depending upon the zone editor provided by the registrar.

Here is the Dig Log, for the domain root. Look at the 2, 4, 6, and 8, in the 4 address entries.

mydomain.com. 3600 IN A 216.239.32.21
mydomain.com. 3600 IN A 216.239.34.21
mydomain.com. 3600 IN A 216.239.36.21
mydomain.com. 3600 IN A 216.239.38.21

In the GoDaddy zone editor, you'll see these entries depicted as

  Host   Points to           TTL
  @      216.239.32.21    1 Hour
  @      216.239.34.21    1 Hour
  @      216.239.36.21    1 Hour
  @      216.239.38.21    1 Hour

The GoDaddy zone editor uses the labels "Host" and "Points to".

Similar labels ("Name", "Label" and "Destination", "Target") are used by various other registrars, in their own zone editor.

A Zone Editor display, showing the base DNS addresses, for GoDaddy.

Here is the display, used by GoDaddy, for "nitecruzr.co.uk".

Here is the zone editor display, as provided by GoDaddy.
Do you see the 4 address records, beneath "Points to"?



The labels in the address records differ, from registrar to registrar. The "Name, Label, or Host" address values (here, shown as "@") will differ, from registrar to registrar - but the "Destination, Target, or Points to" address values will not differ. A properly addressed domain will have the same 4 "Destination, Target, or Points to" address values, as every other properly addressed domain.

mydomain.com. 3600 IN A 216.239.3n.21

Each address will have one of four values for n: 2, 4, 6, or 8.

Complementing "Destination, Target, or Points to", we have another label set.

Complementing the 3 "Destination, Target, or Points to" label address values, for addressing the 4 name servers provided by Google, we have a similar set of 3 "Name, Label, or Host" label address values.

Addressing "Name, Label, or Host" is somewhat simpler - as all 4 entries are identical to each other, for any domain root address entry.

The Blogger instructions, like the GoDaddy zone editor, use "@", when addressing the domain root. The zone editor value used, however, may differ from registrar to registrar.

Any blog owner, wishing to have a working custom domain, needs to understand how to setup a domain for the registrar involved.

The end result.

Both the "Name, Label, or Host" - and the "Destination, Target, or Points to" - label triplets are only examples. Other unidentified registrars may use other labels.

Some registrars - such as 1and1 in their instructions 1&1 Help Center - Enter a CNAME for Your Subdomain - do not use a column based display. Neither "Name, Label, or Host" or "Destination, Target, or Points to" is part of the 1and1 instructions.

Considering the Blogger instructions, and the terminology required, Blogger Help Forum: Get Help with an Issue will not soon run out of blog owners, requesting assistance for making their custom domains work.

---

Some #Blogger blog owners, in the process of setting up their blogs using custom domain publishing, find that labels "Name", "Label", or "Host" - and "Destination", "Points to", or "Target" - are only examples, in the Blogger Help document.

There is no attempt at standardisation, used by the thousands of different Internet registrars, in their dashboards (aka "zone editors").




https://productforums.google.com/forum/#!category-topic/blogger/kMDo0O1xtDM

Custom Domain Setup, And The Blogger Instructions

Custom domain setups continue to confuse blog owners - and lead sometimes to frustration, expressed in Blogger Help Forum: Get Help with an Issue.

When I am trying to set up a custom domain for my new blog, I'm not getting the 2nd CNAME Record, but the settings get saved.

In some cases, the domain may be operational - and other times, the domain will be broken, and no corrective instruction is provided.

The details in the instructions, Blogger Help: How do I use a custom domain name for my blog?, are misleading - and have resulted in broken domains.

The Blogger instructions are confusing.

5. Go to your domain registrar's website and locate the DNS (Domain Name System) settings in the control panel.

Not a lot of details, there.

10. Before you move onto the final step, wait about an hour for your DNS settings to activate. If you attempt the final step before your settings are activated, we'll let you know with a warning message.

All registrars don't use "3600" second TTL.



That's 2 examples of possible problems.

Publishing a blog to a custom domain is so much easier - and produces more reliable results - if you follow basic principles.

• Learn to use your registrar's zone editor.
• Learn to read a Dig log.
• Setup the DNS addresses, for your domain.
• If necessary, add domain ownership verification.

Learn to use your registrar's zone editor.

The registrar dashboard / zone editor is the portion of the registrar's website, that is created to let you, the domain owner, setup your own domain.

The zone editor is unique, for every different registrar - just as every website is different. One of the signs of uniqueness is hinted, by Blogger.

Each CNAME is composed of two parts - Name, Label or Host and Destination, Target or Points to.

These two (only two) terms here refer to the most essential details, in the zone editor, that make your domain operational. The two details have no consistent names - so we use examples.

The first CNAME is the same for everyone, Name being "www" and Destination "ghs.google.com."

That one sentence is the most essential, for all domains. It looks so simple - but it's so easy to get it wrong. Not every blog owner will see "Name" and "Destination" in the zone editor display. This leads to many imaginative - and wrong - alternatives.

Each registrar labels their zone editor, as they see fit. I've seen other terms used, in addition to the 6 implied. Both "Name, Label or Host" and "Destination, Target or Points to" are merely three examples, for each of these two essential elements.

These details are only hinted, by the Blogger instructions.

5. Go to your domain registrar's website and locate the DNS (Domain Name System) settings in the control panel.
6. Now it's time to enter the CNAMEs. Where it says Name, Label or Host simply enter "www" and list ghs.google.com as the Destination, Target or Points to.

Learning how to look, in the zone editor, is much more reliable than being told what to look for.

Learn to read a Dig log.

Compared to the confusion behind the registrar's zone editor, a Dig log is simplicity.

There are three basic DNS configurations, which produce a reliable domain for publishing a Blogger blog. 99.99% of all blog owners will use only one of the three.

ourdomain.com. 3600 IN A 216.239.32.21
ourdomain.com. 3600 IN A 216.239.34.21
ourdomain.com. 3600 IN A 216.239.36.21
ourdomain.com. 3600 IN A 216.239.38.21
www.ourdomain.com. 3600 IN CNAME ghs.google.com.

This is the asymmetrical DNS address configuration. Excepting one known variation, the asymmetrical configuration - with no options - is most reliable.

Setup the DNS addresses, for your domain.

As long as you have access to the zone editor, and understand the above issues - "Learn to use your registrar's zone editor" and "Learn to read a Dig log" - the rest will fall into place.

Unfortunately, not everybody has zone editor access. Similar to Blogger dashboard access, registrar dashboard access is not always a done deal.

Even having zone editor access, the Blogger instructions can mislead.

8. Optional: You can also enter A-records, which links your naked domain (example.com) to an actual site (www.example.com). If you skip this step, visitors who leave off the "www" will see an error page.
9. Optional continued: After completing Step 8, enter your domain name in the format example.com, and list the I.P. addresses shown below in the "A" section. You'll need to create four separate A-records which point to four different Google IPs.

Many problems, reported in the forums, indicate that using the domain root properly is (should be indicated as) a necessity.

• Always setup the domain root, to redirect to the published URL.
• Always specify all 4 Google servers, as redirection targets.
• Never include any non Google server, as a redirection target.
• Don't forget to enable the domain root redirect.

Once again, the domain root, configured properly, should not be suggested as an option.

10. Before you move onto the final step, wait about an hour for your DNS settings to activate. If you attempt the final step before your settings are activated, we'll let you know with a warning message.

All registrars don't use one hour TTL.

Be careful of the TTL setting. Unless you know better, stick with the registrar's TTL setting - and try to understand the effects of TTL latency.

If necessary, add domain ownership verification.

Returning to the Blogger instructions, we see

The second CNAME is particular to your blog and your Google Account, and is therefore different for each person.

Not every blog owner will see the second CNAME - whether or not the domain is properly setup.

The Blogger dashboard Publishing wizard only displays the "Error 12", and the second CNAME, under specific conditions. In some cases, the blog will be published to the domain - and the second CNAME will not be provided.

You may not see the instructions for the second "CNAME", until your base addresses are right. If you need the second "CNAME", the "Error 12" display will provide details - when the base addresses redirect properly. If the blog publishes, a second "CNAME" is not necessary.

That is my suggestion. Get the addresses right, before you start - then publish to the domain URL.

If the blog publishes to the domain, and the addresses are wrong, the domain will be broken - or unreliable.

The bottom line.

It's good to have instructions, they suggest the need for proper domain setup technique. Just don't be surprised if following them blindly gives you a broken domain - and an offline blog.

If you are lucky, the blog will appear offline immediately after using the Publishing wizard - and you will know that there is a problem to be fixed. Other times, you (or some readers) might not realise a problem until months or years later.

In the latter case, we'll see you, one day, in Blogger Help Forum: Get Help with an Issue.

I published my blog to my private domain, last month - and the blog pageviews have been in the crapper, ever since!

---

The instructions supplied by #Blogger, for setting up a custom domain published blog, can be misleading. Blindly observed, they can lead to an immediately offline blog - or to a blog that is online for some, and intermittently offline for others.

https://productforums.google.com/forum/#!category-topic/blogger/Jv0fT5cws3U

The DNS TTL Setting Is Chosen By The Registrar

Some blog owners, publishing their blog to a custom domain, wonder about the mysterious TTL setting for the domain.

What is "3600"? Why do I see "7200" in my Dig log?

and

Why do I have to wait 8 hours, after changing my DNS addresses?

DNS latency (aka "TTL") is not understood, by many blog owners. A mistake in setting TTL can cause anger and frustration.

"Time To Live" aka "TTL" is a registrar individual setting, that is used for providing proper performance from the registrars name servers and network.

There are multiple TTL settings - and each can have a different effect on your domain.

TTL controls caching of the DNS addresses, used to access your domain.

TTL indicates how long a DNS address will remain in cache, on a computer, before that computer requests an updated value. It's an essential (but obscure) component, in setting up a custom domain.

Since you're reading this blog, your computer has the address of this blog in cache - and won't be requesting an update, until "TTL" for "blogging.nitecruzr.net" expires. GoDaddy, the registrar for "nitecruzr.net", uses "3600" seconds, or 1 hour TTL.

Your computer probably uses the nameservers provided by your ISP - and your ISPs nameservers get updates from the nameservers provided by GoDaddy. Changes to "nitecruzr.net" go from Google, to GoDaddy, to your ISP, to your computer - and TTL applies to each DNS cache.

A typical Dig log, for a domain with a low TTL value.

Look at a Dig log extract, for "nitecruzr.net".

http://www.digwebinterface.com/?hostnames=nitecruzr.net%0D%0Ablogging.nitecruzr.net&type=A&useresolver=8.8.4.4&ns=auth&nameservers=

nitecruzr.net. 3600 IN A 216.239.32.21
nitecruzr.net. 3600 IN A 216.239.34.21
nitecruzr.net. 3600 IN A 216.239.36.21
nitecruzr.net. 3600 IN A 216.239.38.21
blogging.nitecruzr.net. 3600 IN CNAME ghs.google.com.

You set the TTL, for each individual DNS address, when you setup your domain. The registrar provides a recommended TTL - but most registrars let you select a different setting, within a given range.

A lower TTL ("600" seconds or 10 minutes) provides faster refresh after a change is made - but puts more load on the registrars name servers, and requires a more responsive network.

A higher TTL ("7200" or 2 hours) provides slower refresh - and puts less load on the registrars name servers. And when a change is made, by Google, a higher TTL can cause problems.

If you don't understand DNS, you will be better off not changing from the registrar recommended setting. Some registrars won't even have a TTL setting, in their zone editor - and others may hide it, behind an "Advanced" menu or similar.

If you generate a Dig log for your domain, you'll see the TTL settings for your addresses.

A typical Dig log, for a domain with a high TTL value.

Look at a Dig log, for "rockchickenz.com".

Here, the current DNS addresses (correction pending).

Here, we see a TTL of "14400" (displayed as "14399") - or 4 hours.

rockchickenz.com. 14399 IN A 78.137.164.51
www.rockchickenz.com. 14399 IN CNAME ghs.google.com.

For best results, we suggest that you wait 2 x TTL, after making DNS changes.

I recommend waiting 2 x "TTL", after making any DNS changes, before acting from those changes. Having diagnosed the painful "Another blog ..." domain database corruption, too many times, I suggest this whenever possible.

After you correct the addresses, please wait 8 full hours (2 x "14400" seconds) before continuing. This will let all DNS servers on the Internet receive the corrected addresses.

In many cases, TTL will be "3600" or "1 hour" - and with a typical forum diagnostic session taking several hours between posts, a one or two hour TTL is transparent to the forum discussion.

With domains using 4 hour TTL, suggesting that the blog owner wait 8 full hours after making the change, before re publishing the blog to the domain, makes sense. And a 2 full days, for "86400" seconds, makes even more sense.

And getting a righteous DNS address complement verified - before re publishing - makes the most sense.

---

DNS TTL latency, which affects accessibility of every #Blogger custom domain published blog, is not understood by many blog owners. To provide a stable domain - and a more visible blog after it's published to a custom domain - every blog owner should understand this obscure detail.

Blogger Magic - Reading A Dig Log

Whether you're setting up or troubleshooting a custom domain, knowing how to read a Dig log is a useful skill.

There are hundreds of registrars, serving the Internet community, each with their own dashboard. Blog owners, setting up their domains for their Blogger blogs, must deal with the syntax and terminology used by each different dashboard.

A Dig log lets the blog owner identify the DNS addresses for the domain, using a consistent display.

By identifying the DNS addresses used in a given domain, a blog owner or an experienced forum helper can diagnose many custom domain DNS related problems.

Here is an example of Dig log use, showing an excerpted Dig log, in a typical forum topic. For more detail, see my earlier post, Diagnosing Problems With Custom Domains: Dig.

I have a domain (www.rockchickenz.com) - and want to link my blog (rockchickenz.blogspot.com).

• Start by verifying URLs involved.
• Continue with Dig Web Interface.
• A full screen print of the Dig log.
• The relevant portion of the Dig log, from the screen print.
• The relevant portion of the Dig log, as text.
• The advice provided, to the blog owner.
• Alternate / complementary tools used.

Start by verifying URLs involved.

Whenever possible, make a screen print, and a text copy, of the Blogger dashboard Publishing wizard, at Settings - Basic. Knowing the status of the blog and domain - and the exact URLs involved - can go a long way to diagnosing many custom domain publishing problems.

Continue with a Dig Web Interface log.

The best tool for generating a Dig log is Dig Web Interface. Alternate / complementary tools are listed below.

I use DWI, for this purpose, by preference. DWI lets you:

• Package the URLs in the Dig target, in the reference URL.
• Include multiple target URLs, in one reference URL.
• Both capabilities are very useful, in diagnosing Blogger custom domain publishing problems.

Start from the Dig Web Interface page.

Add the domain root and "www" alias, under "Hostnames or IP addresses:".

I select Type: "A", and Nameservers: "Authoritative", for my actual diagnoses.

Click "Dig".



The Dig Log reference URL, for "rockchickenz.com", generated from DWI. Target URLs are "rockchickenz.com" and "www.rockchickenz.com".

http://www.digwebinterface.com/?hostnames=rockchickenz.com%0D%0Awww.rockchickenz.com&type=A&ns=resolver&useresolver=8.8.4.4&nameservers=

A full screen print of the Dig log.

This is the complete Dig log, resulting from the Dig Log URL (above), and containing the relevant portion (below).

This is the Dig log, for "rockchickenz.com".



The relevant portion of the Dig log, from the screen print.

This is the important portion of the screen print (above), and showing the text (below).

This is the relevant portion of the Dig log, for "rockchickenz.com".



Note the TTL value of "14399" - which is a typical Dig log display for TTL set as "14400" (14400 seconds or 4 hours), in the registrar's zone editor. TTL is a setting which is used to adjust name server performance.

Unless you are experienced with DNS setup (and probably don't need to read this advice), you should use the default TTL provided by the registrar, for your domain. Your registrar wants to provide a stable domain for you - and the TTL value affects domain stability.

The relevant portion of the Dig log, as text.

These are the important details from the screen print (above), with colour highlights corresponding to domain specific details (below).

rockchickenz.com@8.8.4.4 (Default):
rockchickenz.com. 14399 IN A 78.137.164.51

www.rockchickenz.com@8.8.4.4 (Default):
www.rockchickenz.com. 14399 IN CNAME ghs.google.com.
ghs.google.com.  21392 IN CNAME ghs.l.google.com.
ghs.l.google.com. 92 IN A 64.233.183.121

The latter is typically seen, with a blog owner having received bogus advice - and reporting an inconsistently accessible blog.

The advice provided, to the blog owner.

The typical advice, provided to the blog owner, would include domain specific details - accompanied by a link to Setting Up DNS Addresses For Custom Domains.

First, generic advice:

Remove the addresses highlighted in red - and add the addresses highlighted in green - and keep the addresses highlighted in yellow.

Then, specific advice:

This is what you have:

rockchickenz.com. 14400 IN A 78.137.164.51
www.rockchickenz.com. 14400 IN CNAME ghs.google.com.

This is what you need:

rockchickenz.com. 14400    IN    A    216.239.32.21
rockchickenz.com. 14400    IN    A    216.239.34.21
rockchickenz.com. 14400    IN    A    216.239.36.21
rockchickenz.com. 14400    IN    A    216.239.38.21
www.rockchickenz.com. 14400    IN    CNAME    ghs.google.com.

The advice references a typical ASymmetrical DNS custom domain setup - the address set used in 99% of all custom domain setups. Note here, the specified TTL of "14400" (4 hours).

Using the above advice, the blog owner can then, if necessary, research the syntax used by the registrar's dashboard (aka "zone editor") - and make the necessary changes.

Alternate / complementary tools used.

Alternate tools, which can be used to generate a Dig log, are the Kloth.Net Dig DNS Lookup, and the Who.Is DNS display. Neither alternate is as compact and complete - but they can be used to verify results.

Complementary tools include the Global DNS Propagation Checker, the intoDNS domain DNS health checker, the Rex Swain HTTP Viewer, and the Whois Lookup.

In some cases, my 12 link affinity / differential connectivity test may be useful.

For more information.

See WikiPedia: dig (command).

---

One of the most useful tools, for diagnosing #Blogger custom domain problems, is a Dig Log. Learning how to read a Dig Log is a useful skill, for any blog owner wishing to publish a blog to a custom domain.